Texas Instruments THS4500IDGN, differential amplifier, 1 circuit, 2800 V/µs slew rate, 370 MHz -3dB bandwidth, 4.5-15 V supply, -40 to 85 °C, 8-HVSSOP exposed pad, surface mount.
| Parameter | Value |
|---|---|
| Output type | Differential |
| Mounting | Surface Mount |
| Amplifier type | Differential |
| Voltage - input offset | 4 mV |
| Voltage - supply span | 4.5 V |
| Current - supply | 23mA |
| Current - input bias | 4 µA |
| Current - output (Channel) | 120 mA |
| Operating temperature | -40°C ~ 85°C |
| -3db bandwidth | 370 MHz |
| Gain bandwidth product | 300 MHz |
| Package | Tube |
| Slew rate | 2800V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) Exposed Pad |
| Number of circuits | 1 |
Confirm your layout includes a via array under the pad to the ground plane. The tube shipment is fine for prototype builds; production volumes typically move to tape-and-reel, so verify your CM's feeder setup if ordering reel quantities.
No last-time-buy or obsolescence notice is on record.
The -3 dB bandwidth is 370 MHz, and the gain-bandwidth product is 300 MHz.
The slew rate is 2800 V/µs.
No. The product status is Active, and it is ROHS3 compliant. No end-of-life notice is in effect.
Within the same functional class (differential amplifier), the THS4215DRBT is a voltage-feedback alternative with a 350 MHz bandwidth and 970 V/µs slew rate. It is not a pin-for-pin replacement — verify the package and supply voltage for your layout.