FlatLink LVDS receiver — 5-channel deserializer for display links
The Texas Instruments SN75LVDS82DGGG4 is a 5-channel LVDS receiver from the FlatLink family, designed to deserialize high-speed serialized data from an LVDS source — typically a graphics controller or FPGA — back into parallel TTL-level outputs. It integrates five receivers with no drivers on-chip, making it a unidirectional deserializer for point-to-point display or camera interfaces. Operating from a single 3V to 3.6V supply, the part requires a clean 3.3V rail; it is not tolerant of 1.8V or 5V I/O without external level translation. The 56-pin TSSOP package (0.5mm pitch) demands careful PCB routing for the LVDS differential pairs and the parallel output bus.
5 receivers, 0 drivers — pure deserialization path
The 0/5 driver/receiver count means this part is a dedicated deserializer with no transmit capability. It expects a serialized LVDS stream from a FlatLink transmitter and outputs parallel RGB or control data.
Active lifecycle — no near-term obsolescence concern
No pin-to-pin replacement is mandated by the factory at this time.