Skip to main content
Texas Instruments SN75LVDS389DBTRG4 — Interface & Transceivers

SN75LVDS389DBTRG4 LVDS Driver, 630 Mbps, 38-TSSOP

MPNSN75LVDS389DBTRG4
End of Life

Texas Instruments SN75LVDS389DBTRG4, LVDS Driver, 8 drivers, 630Mbps data rate, 3V–3.6V supply, 38-TSSOP, 0°C~70°C, Tape & Reel.

$58.8000Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN75LVDS389DBTRG4 specifications
ParameterValue
TypeDriver
MountingSurface Mount
Supply voltage3V ~ 3.6V
ProtocolLVDS
Operating temperature0°C~70°C
PackageTape & Reel (TR)
Data rate630Mbps
Case38-TFSOP (0.173\", 4.40mm Width)
Number of drivers (Receivers)8/0

Product details

Eight-channel LVDS driver for high-speed serial backplanes

The Texas Instruments SN75LVDS389DBTRG4 is an eight-channel LVDS driver in a 38-pin TSSOP package, designed to translate parallel CMOS/TTL data into low-voltage differential signals at up to 630 Mbps per channel. The 8/0 driver/receiver count means this is a pure transmit bank — no integrated receiver — so the link partner needs a separate LVDS receiver, such as the SN75LVDS388 or equivalent.

630 Mbps per channel — what it buys on the bus

Each of the eight outputs switches at 630 Mbps, which in a typical 24-bit RGB video link with one clock channel leaves headroom for a 24-bit data word plus control signals at pixel rates above 60 Hz. In a telecom backplane carrying eight serialised T1/ streams, that same 630 Mbps per pair comfortably exceeds the aggregate line rate. The LVDS swing (typically 350 mV differential into a 100 Ω termination) keeps radiated emissions low compared to single-ended CMOS at the same frequency — a real advantage when the board has to pass FCC Class A without a shielded enclosure.

Frequently asked questions

What is the closest pin-compatible alternative to SN75LVDS389DBTRG4?

Confirm supply voltage and output drive compatibility from the respective datasheets before substituting.