Skip to main content
Log in
Texas Instruments SN74LVC1G07DBVTE4 — Interface & Transceivers

SN74LVC1G07DBVTE4 Buffer, Non-Inverting, Open Drain, 74LVC

MPNSN74LVC1G07DBVTE4
End of Life

Texas Instruments 74LVC series SN74LVC1G07DBVTE4, Buffer, Non-Inverting, 1-Element, 1-Bit per Element, Open Drain Output, SOT-23-5, -40°C to 125°C, 1.65V to 5.5V supply.

$3.0900Ref. price · indicative, final on quote
Texas Instruments SN74LVC1G07DBVTE4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN74LVC1G07DBVTE4 specifications
ParameterValue
Series74LVC
Logic typeBuffer, Non-Inverting
Output typeOpen Drain
MountingSurface Mount
Supply voltage1.65V ~ 5.5V
Current - output high, low-, 32mA
Operating temperature-40°C~125°C(TA)
PackageTape & Reel (TR)
CaseSC-74A, SOT-753
Number of elements1
Number of bits per element1

Product details

Single buffer with open-drain output for mixed-voltage buses

Open-drain output and pull-up resistor requirement

Because the output is open drain, this buffer can sink current but cannot source it. The datasheet specifies a sink capability of 32 mA (low-level output current), while the high-level output current is listed as "-" (no sourcing). For the output to pull high, an external pull-up resistor must be connected from the output pin to the desired high-level voltage rail. It also works in wired-OR interrupt or status lines where multiple open-drain outputs share a common pull-up.

The base product number 74LVC1G07 is widely used across multiple package variants, so supply continuity is supported by the broader 74LVC1G07 family.

Package and footprint: SOT-23-5

This is a five-pin surface-mount package with a 0.95 mm pitch, common for single-gate logic. The SOT-23-5 footprint is shared by many single-gate 74LVC devices, so a layout designed for this part can often accommodate a pin-compatible alternative without board revision.

Frequently asked questions

Is SN74LVC1G07DBVTE4 a direct replacement for SN74LVC1G07DBVR?

Yes, the SN74LVC1G07DBVTE4 is functionally identical to the SN74LVC1G07DBVR. Both are the same 74LVC1G07 buffer in a SOT-23-5 package. The DBVTE4 suffix indicates tape-and-reel packaging with a specific reel quantity (typically 3000 pieces per reel), while the DBVR suffix may denote a different reel quantity or packaging option. Electrically and pin-for-pin, they are interchangeable.

Does SN74LVC1G07DBVTE4 require external pull-up resistors?

Yes, because the output is open drain, an external pull-up resistor is required for the output to reach a high logic level. The resistor connects from the output pin to the desired pull-up voltage rail. The value is chosen based on the load capacitance and required rise time; typical values range from 1 kΩ to 10 kΩ for standard logic speeds.