Skip to main content
Log in
Texas Instruments SN74LVC1G06DCKTE4 — Interface & Transceivers

SN74LVC1G06DCKTE4 Buffer, Inverting, Open Drain, 1.65V-5.5V

MPNSN74LVC1G06DCKTE4
End of Life

Texas Instruments 74LVC series SN74LVC1G06DCKTE4, Buffer, Inverting, Open Drain, 1.65V ~ 5.5V supply, -40°C ~ 125°C, SC-70-5 package, Tape & Reel.

$0.3900Ref. price · indicative, final on quote
Texas Instruments SN74LVC1G06DCKTE4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN74LVC1G06DCKTE4 specifications
ParameterValue
Series74LVC
Logic typeBuffer, Inverting
Output typeOpen Drain
MountingSurface Mount
Supply voltage1.65V ~ 5.5V
Current - output high, low-, 32mA
Operating temperature-40°C~125°C
PackageTape & Reel (TR)
Case5-TSSOP, SC-70-5, SOT-353
Number of elements1
Number of bits per element1

Product details

The SN74LVC1G06DCKTE4: The open-drain topology also enables wired-OR connections where multiple outputs share a common pull-up.

32 mA sink current — sizing the pull-up resistor

The output low current is specified at 32 mA, which is the maximum current the open-drain FET can sink while maintaining a valid logic low. This figure drives the minimum pull-up resistor value.

SC-70-5 package — board area and routing

Housed in a 5-lead SC-70-5 (also known as SOT-353), this part occupies minimal board area. The fine pitch suits compact designs but demands careful solder-paste stencil aperture to avoid bridging.

The base product number is 74LVC1G06, and the series is 74LVC — a mature, widely second-sourced logic family. If dual-sourcing is needed, pin-compatible alternatives from other vendors exist within the 74LVC1G06 function set.

Frequently asked questions

What is the output type of SN74LVC1G06DCKTE4?

The output is open drain, meaning the device can only pull the output low; an external pull-up resistor is required to establish a high level.

What is the substitute for SN74LVC1G06DCKTE4?

Pin-compatible alternatives within the 74LVC1G06 function set are available from other logic vendors. The base product number 74LVC1G06 identifies the standard function; any supplier's variant with that base number and the same package (SC-70-5) is a direct substitute.