Skip to main content
Log in
Texas Instruments SN74LVC1G06DBVRE4 — Interface & Transceivers

SN74LVC1G06DBVRE4 Texas Instruments Buffer, Inverting

MPNSN74LVC1G06DBVRE4
End of Life

Texas Instruments 74LVC series single inverting buffer with open-drain output, SC-74A/SOT-753 package, 1.65V–5.5V supply, 32mA sink, -40°C to 125°C, Tape & Reel.

Texas Instruments SN74LVC1G06DBVRE4 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN74LVC1G06DBVRE4 specifications
ParameterValue
Series74LVC
Logic typeBuffer, Inverting
Output typeOpen Drain
MountingSurface Mount
Supply voltage1.65V ~ 5.5V
Current - output high, low-, 32mA
Operating temperature-40°C~125°C
PackageTape & Reel (TR)
CaseSC-74A, SOT-753
Number of elements1
Number of bits per element1

Product details

The SN74LVC1G06DBVRE4: The open-drain output sinks 32 mA when low, with no high-side drive. This is enough to directly switch a small relay coil, an LED with a series resistor, or the input of a downstream logic gate. Because the output is open-drain, you can pull it up to a voltage different from VCC — useful for level-shifting a 3.3 V signal to 5 V, for example. Just add an external pull-up resistor sized for the desired rise time and load current.

Active lifecycle — no LTB planning needed

That means no last-time-buy window to track, no EOL risk for current designs. For volume pricing and lead time, submit an RFQ — we source through authorized and independent channels and confirm availability at quote time.

Frequently asked questions

What is the difference between SN74LVC1G06DBVRE4 and SN74LVC1G06DBVR?

Both share the same base part number and electrical specifications. The difference is in the packaging and reel suffix: DBVRE4 indicates a specific TI reel and packaging configuration (often associated with a particular customer or region), while DBVR is the standard tape-and-reel suffix. Functionally they are identical, but verify the exact ordering code with your BOM to ensure the correct packaging variant.

Can SN74LVC1G06DBVRE4 be used for 5V level shifting?

Yes. Because the output is open-drain, you can pull it up to 5 V even if VCC is 3.3 V or 1.8 V. The input is 5 V tolerant across the full supply range, so a 5 V logic signal on the input is safe. This makes the part a simple single-bit level translator from a lower-voltage domain to a 5 V bus.