RS-485 at 26 Mbps — full duplex, no half-duplex handshake needed
With a data rate of 26 Mbps, it suits high-speed factory-floor links, motor-drive feedback, or any differential bus where you need simultaneous transmit and receive without the turnaround overhead of half-duplex.
3.3V supply rail — no separate I/O voltage needed
The supply range of 3V to 3.6V means this part runs directly from a 3.3V rail. That avoids the extra regulator or level shifter required by 5V-only transceivers when interfacing with 3.3V logic. The 20-VFQFN exposed-pad package (3.5x4.5 mm) keeps the footprint small; the thermal pad should be stitched to the ground plane with several vias to pull heat out of the die during continuous high-speed transmission.