Skip to main content
Log in
Texas Instruments SN65HVD33MDREP — Interface & Transceivers

SN65HVD33MDREP RS-485 Transceiver, 23 Mbps, -55 to 125°C

MPNSN65HVD33MDREP
Active

Texas Instruments SN65HVD33MDREP, RS-422/RS-485 transceiver, full-duplex, 1 driver/1 receiver, 23 Mbps data rate, 3V-3.6V supply, -55°C to 125°C, 14-SOIC package.

$9.4100Ref. price · indicative, final on quote
Texas Instruments SN65HVD33MDREP datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN65HVD33MDREP specifications
ParameterValue
TypeTransceiver
MountingSurface Mount
Supply voltage3V ~ 3.6V
ProtocolRS422, RS485
Operating temperature-55°C~125°C
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
Data rate23Mbps
Case14-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis50 mV
Number of drivers (Receivers)1/1

Product details

What this transceiver does on the bus

The Texas Instruments SN65HVD33MDREP is a full-duplex RS-422/RS-485 transceiver in a 14-SOIC package, handling one driver and one receiver on a single 3V to 3.6V rail. It pushes data at 23 Mbps, which is on the fast side for RS-485 — useful for high-speed industrial links or avionics data buses where you need to move packets quickly without stepping up to LVDS. The receiver hysteresis is 50 mV, giving you some noise margin on a long cable run.

Military temperature range — what it buys you

The full temperature grade means the driver output levels and receiver thresholds are guaranteed across that span, not just typical. If your board lives in a heated cabinet, the commercial or industrial grade is cheaper — but if the board sees the outside of the shelter, this is the one.

TI lists the SN65HVD33MDREP as Active. No end-of-life notice, no last-time-buy deadline to chase.

Frequently asked questions

What is the data rate of SN65HVD33MDREP?

23 Mbps. That's fast for RS-485 — most transceivers in this family top out at 10 or 20 Mbps. At that speed, cable length drops to a few meters, and termination resistors are mandatory to avoid reflections.

Is SN65HVD33MDREP a full-duplex transceiver?

Yes, it is full-duplex. That means it can transmit and receive simultaneously on separate twisted pairs, which is standard for RS-422 and optional for RS-485. If your bus is half-duplex (shared pair), you'd need a different part or external direction control.