Skip to main content
Log in
SN65HVD30MDREP

TI SN65HVD30MDREP RS-422/485 Transceiver, 25 Mbps

MPNSN65HVD30MDREP
Active

Texas Instruments SN65HVD30MDREP, RS-422/RS-485 transceiver, full duplex, 25 Mbps data rate, 3V–3.6V supply, 50 mV receiver hysteresis, -55°C to 125°C operating temperature, 8-SOIC package.

$9.6900Ref. price · indicative, final on quote
Texas Instruments SN65HVD30MDREP datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SN65HVD30MDREP specifications
ParameterValue
TypeTransceiver
MountingSurface Mount
Supply voltage3V ~ 3.6V
ProtocolRS422, RS485
Operating temperature-55°C~125°C
DuplexFull
PackageTape & Reel (TR); Cut Tape (CT)
Data rate25Mbps
Case8-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis50 mV
Number of drivers (Receivers)1/1

Product details

RS-422/485 transceiver with military temperature coverage

The full-duplex capability allows simultaneous transmit and receive on a four-wire bus, which is the typical topology for point-to-point RS-422 links and for RS-485 multi-drop systems that need separate data paths.

At 25 Mbps the SN65HVD30MDREP supports the upper end of RS-485 signaling speed. Practical cable length at this rate is typically under 100 metres; above that the signal-integrity budget tightens and termination becomes critical. For slower links (below 1 Mbps) the same transceiver works without any configuration change — the slew rate is not limited, so the tradeoff is faster edge rates that may need attention to stub lengths and termination matching.

For a BOM line needing this exact military-temperature transceiver, the procurement path is a direct RFQ.

Frequently asked questions

Does SN65HVD30MDREP support full duplex communication?

Yes, the SN65HVD30MDREP is a full-duplex transceiver. It can transmit and receive simultaneously over a four-wire RS-422 bus or a four-wire RS-485 configuration.

What is the difference between SN65HVD30MDREP and SN65HVD30DR?

The SN65HVD30MDREP is the military-temperature-grade variant (-55°C to 125°C) of the same base transceiver design. The SN65HVD30DR is the standard commercial/industrial version with a narrower temperature range. The MDREP suffix denotes the extended temperature screening and the enhanced reliability qualification for defence and aerospace programs. Both parts are pin-compatible in the 8-SOIC footprint.