Texas Instruments SN65HVD11QP, RS422/RS485 Transceiver, Half-Duplex, 1/1 Drivers/Receivers, 10Mbps, 3V-3.6V, -40°C~125°C, 8-DIP (0.300", 7.62mm), 8-PDIP, Tube.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Through Hole |
| Supply voltage | 3V ~ 3.6V |
| Protocol | RS422, RS485 |
| Operating temperature | -40°C~125°C |
| Duplex | Half |
| Package | Tube |
| Data rate | 10Mbps |
| Case | 8-DIP (0.300\", 7.62mm) |
| Receiver hysteresis | 35 mV |
| Number of drivers (Receivers) | 1/1 |
The Texas Instruments SN65HVD11QP is a half-duplex RS-422/RS-485 transceiver that handles 10 Mbps signaling over a single differential pair, with one driver and one receiver integrated into an 8-pin PDIP package.
TI lists the SN65HVD11QP as obsolete.
No official replacement part number is listed in the lifecycle data for the SN65HVD11QP. For a pin-compatible alternative within the same family, evaluate the SN65HVD12 — it is a half-duplex RS-485 transceiver in the same 8-pin PDIP footprint but with a different receiver hysteresis specification. Verify the hysteresis difference against your noise budget before substituting.
Yes, the SN65HVD11QP is listed as obsolete by Texas Instruments.
The SN65HVD11QP supports a data rate of 10 Mbps.