Texas Instruments SN65HVD10DRG4, RS422/RS485 Transceiver, Half-Duplex, 1/1 Drivers/Receivers, 32Mbps, 3V~3.6V, -40°C~85°C, 8-SOIC.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 3V ~ 3.6V |
| Protocol | RS422, RS485 |
| Operating temperature | -40°C~85°C |
| Duplex | Half |
| Package | Tape & Reel (TR) |
| Data rate | 32Mbps |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 35 mV |
| Number of drivers (Receivers) | 1/1 |
The 35 mV receiver hysteresis provides built-in noise immunity on long bus runs, reducing the risk of output chatter from slow edges or coupled interference.
If the design runs a 5V bus or needs 5V logic interface, a level translator or a different transceiver variant is required.
The SN65HVD10DRG4 supports a data rate of 32 Mbps, which is the maximum signaling rate for the driver and receiver.
Operating from a 5V rail exceeds the absolute maximum ratings and will damage the part.
The SN65HVD10DRG4 is the tape-and-reel packaged variant of the base SN65HVD10. The 'D' suffix in SN65HVD10D typically indicates a tube or different packaging, but the die and electrical specs are the same. Pin-compatible for the same 8-SOIC footprint.