Active production — still a current BOM line
Texas Instruments lists the OPA2890IDGST as Active in its product portfolio, so it remains available for both new designs and production replenishment without a last-time-buy window. The part is ROHS3 compliant, clearing EU and global regulatory requirements for lead-free assembly.
Dual-channel voltage-feedback amplifier — signal-chain fit
Two independent voltage-feedback amplifiers in a single 10-VSSOP package, each drawing 2.25 mA typical supply current — the per-channel quiescent current stays low enough for multichannel boards where the thermal budget is tight. The 400 V/µs slew rate and 250 MHz -3 dB bandwidth mean the amplifier can handle fast pulse edges and wideband signals — think ADC driver front-ends or video distribution where settling time to 0.1% matters more than the raw gain-bandwidth product. Gain-bandwidth product is 120 MHz, so at a closed-loop gain of 10 the small-signal bandwidth is roughly 12 MHz — enough for most sensor-conditioning and communication receiver stages.
Supply range and temperature grade — board-level flexibility
Operates from a single 3 V rail up to 12 V, or split supplies down to ±1.5 V — the same BOM can serve 3.3 V and 5 V systems without a voltage translator. Rated for -40°C to 85°C ambient, so it fits industrial enclosures, outdoor telecom cabinets, and engine-bay-adjacent electronics where the internal temperature stays below the 85°C ceiling. Input offset voltage is 2 mV typical, input bias current 100 nA — adequate for DC-coupled paths where the error budget allows a few millivolts of offset; for sub-millivolt precision, a chopper-stabilized amplifier would be a better fit.
Package and sourcing — procurement notes
Supplied in 10-VSSOP (MSOP-10 compatible) with 0.50 mm pitch — the footprint matches the standard 10-lead MSOP land pattern, so no board spin is needed if you are migrating from another MSOP-10 op-amp. Available in Tape & Reel (TR) for automated pick-and-place or Cut Tape (CT) for prototype runs — order the reel variant for production volumes, the cut tape for bench builds.