Texas Instruments OPA2202IDGKT, General Purpose Amplifier, 2 Circuit, Push-Pull Output, 1 MHz Gain Bandwidth, 0.35 V/µs Slew Rate, 4.5 V to 36 V Supply, -40°C to 105°C, 8-VSSOP Package.
| Parameter | Value |
|---|---|
| Output type | Push-Pull |
| Mounting type | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 20 µV |
| Voltage - supply span | 4.5 V |
| Current - supply | 580µA (x2 Channels) |
| Current - input bias | 250 pA |
| Current - output (Channel) | 35 mA |
| Operating temperature | -40°C ~ 105°C (TA) |
| Gain bandwidth product | 1 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.35V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
The OPA2202IDGKT carries an Active lifecycle status with ROHS3 compliance. The operating temperature range of -40°C to 105°C covers industrial control cabinets, outdoor telecom shelters, and factory-floor analog I/O modules.
The device is supplied in an 8-VSSOP package (3.00 mm × 3.00 mm body), surface-mount only. Available in Tape & Reel or Cut Tape.
The TLV9362IDDFR is a pin-compatible dual op-amp from the same TI family with 10.6 MHz GBW, 25 V/µs slew rate, and rail-to-rail output — a faster alternative at higher supply current (2.6 mA per channel). The TLV9351IDCKR is a single-channel alternative in the same 8-VSSOP footprint.
Yes, the OPA2202IDGKT is ROHS3 compliant.
This dual op-amp is suited for general-purpose signal conditioning — sensor amplifiers, active filters, control-loop compensation, and data-acquisition front-ends — in industrial, telecom, and instrumentation equipment where supply voltage up to 36 V and moderate bandwidth are required.