Texas Instruments LP2980IM5-3.2/NOPB, fixed-output positive LDO, 3.2V, 50mA, 0.22V dropout at 50mA, 95µA quiescent current, 63dB PSRR at 1kHz, SOT-23-5 package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Fixed |
| Mounting | Surface Mount |
| Voltage - input | 16V |
| Voltage dropout | 0.22V @ 50mA |
| Voltage - output (Min (Fixed)) | 3.2V |
| Output current | 50mA |
| Current - supply | 1.2 mA |
| Current - quiescent | 95 µA |
| Operating temperature | -40°C~125°C |
| PSRR | 63dB (1kHz) |
| Package | Tape & Reel (TR) |
| Case | SC-74A, SOT-753 |
| Control features | Enable |
| Protection features | Over Current, Over Temperature, Short Circuit |
| Number of regulators | 1 |
| Output configuration | Positive |
The LP2980IM5-3.2/NOPB: Maximum dropout voltage is 0.22 V at 50 mA output. Quiescent current is 95 µA typical, rising to 1.2 mA max supply current. PSRR is 63 dB at 1 kHz.
Protection features include over-current, over-temperature, and short-circuit. The Enable control pin allows the regulator to be shut down externally, pulling the quiescent current to near zero when the rail is not needed.
This part is obsolete; engineers need an alternative to avoid redesign or stockouts.
Sourcing buyers need to know if they can still procure the exact part before looking for substitutes.
Design engineers validate fit and specs via the official datasheet.
Brokers and maintenance techs need compatible substitutes without changing the BOM or footprint.
Engineers need pin compatibility to ensure drop-in replacement or layout verification.
Commonly asked when a different voltage output is acceptable; helps evaluate minor spec deviations.