Active production quad op-amp with 15 MHz GBW
The LMP7709MT/NOPB: Key parametric specs include a 15 MHz gain-bandwidth product and a 5.9 V/µs slew rate, giving it enough speed for moderate-bandwidth signal conditioning, filtering, or data-acquisition front-ends. Rail-to-rail output swing means the amplifier can drive an ADC input or a comparator threshold close to the supply rails without headroom loss — useful in low-voltage 2.7 V to 12 V single-supply designs.
Parametric fit for precision signal chains
Input offset voltage is 37 µV typical, and input bias current is 0.2 pA — both low enough that the dominant error term in a high-impedance sensor interface (e.g., a photodiode or pH probe) is the sensor itself, not the amplifier. Each of the four channels draws 2.9 mA supply current, and the total quiescent current for the package is 11.6 mA — a reasonable budget for a multi-channel precision signal chain on a shared rail. Output current capability is 86 mA per channel, enough to drive a moderate load or a 50-ohm terminated line in test equipment.
Industrial temperature grade and package
Rated for -40°C to 125°C operation, the LMP7709MT/NOPB fits into industrial, automotive, or outdoor equipment where the ambient temperature swings beyond the commercial 0-70°C range. Housed in a 14-TSSOP package (4.40 mm width), it sits on a standard surface-mount footprint and mates with the 14-TSSOP supplier device package — no special reflow profile beyond the standard JEDEC MSL level. Shipped in tube packaging, which is typical for prototype or low-volume assembly; for higher volumes, check with your sourcing desk whether reel or tape options are available.
Compliance and sourcing posture
The part is RoHS3 compliant, meeting the EU directive for lead-free and restricted-substance content — no special exemption handling required on the BOM. As an active-production part from Texas Instruments, the LMP7709MT/NOPB is quoted to order against your BOM quantity.