CFA with 2700 V/µs slew rate
The LMH6732MA is a single-channel current feedback op-amp from TI's LMH® high-speed series, delivering a 2700 V/µs slew rate and 540 MHz -3 dB bandwidth. That slew rate means it slews a 2 Vpp output in under 1 ns — the limiting factor in a video or pulse amplifier is the bandwidth, not the edge rate. Supply current is 9 mA typical from a 9 V to 12 V span, and the output can source or sink 115 mA per channel. The 2 µA input bias current and 3 mV input offset voltage are typical for a CFA at this speed — the offset matters most in DC-coupled paths where the output error equals the offset times the noise gain.
Industrial temperature, SOIC-8 footprint
Rated for -40°C to +85°C operating temperature, the LMH6732MA fits industrial and telecom environments where the ambient inside the enclosure stays below 85°C. The 8-SOIC package (3.90 mm body width) is a standard footprint — the same land pattern used for general-purpose op-amps, so a board already laid out for an SOIC-8 CFA accepts this part without a respin. Surface-mount only — no through-hole variant exists in this series. The bulk packaging means it ships in tubes or trays, not tape-and-reel; for pick-and-place, the tube feed requires a vibratory bowl or tube feeder on the placement head.