Texas Instruments VIP™ III series, LM7171BIMX/NOPB voltage feedback amplifier, 1 circuit, 4100 V/µs slew rate, 220 MHz -3 dB bandwidth, 5.5 V to 36 V supply, 8-SOIC package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Series | VIP™ III |
| Mounting type | Surface Mount |
| Amplifier type | Voltage Feedback |
| Voltage - input offset | 200 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 6.5mA |
| Current - input bias | 2.7 µA |
| Current - output (Channel) | 118 mA |
| Operating temperature | -40°C ~ 85°C |
| -3db bandwidth | 220 MHz |
| Gain bandwidth product | 200 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 4100V/µs |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 1 |
The part comes in an 8-SOIC (0.154", 3.90 mm width) — surface-mount, standard for automated assembly. Available in Tape & Reel or Cut Tape.
The LM7171BIMX/NOPB is listed as Active with ROHS3 compliance. No last-time-buy notice, no NRND flag — it's still a valid choice for new designs.
The slew rate is 4100 V/µs, which is the standout spec for this part — it's designed for fast pulse and wideband applications.
A functional peer is the THS4215DRBT, a voltage feedback amp with 970 V/µs slew rate and 350 MHz bandwidth, but it runs on a 5 V supply rather than the 5.5 V to 36 V range of the LM7171. The OPA859QDSGRQ1 is a J-FET input amp with 900 MHz bandwidth and AEC-Q100 qualification, but it's a different topology and not a pin-compatible swap.
Yes, the LM7171BIMX/NOPB is offered in Tape & Reel (TR) as well as Cut Tape (CT) for prototype quantities.