56-TSSOP LVDS receiver – active production, narrow supply rail
The DS90CF384AMTD/NOPB is a Texas Instruments specialized interface IC in a 56-TSSOP package, designed for LVDS (Low-Voltage Differential Signaling) receiver applications.
Package and mounting – 56-TSSOP with 0.50 mm pitch
The DS90CF384AMTD/NOPB is supplied in a 56-TFSOP (0.240", 6.10mm Width) package, also designated as 56-TSSOP by the supplier device package. The 0.50 mm pitch demands careful PCB layout — a 4-layer board is typical for fan-out, though a 2-layer design can work if the signal routing is kept short and the ground plane is solid. For reflow profiles, the standard lead-free solder profile for TSSOP packages applies; no special bake-out is required unless the moisture sensitivity level (MSL) on the reel label indicates otherwise.
Supply voltage and application fit
With a supply range of 3V to 3.6V, this IC is a natural fit for 3.3V LVDS links in flat-panel displays, camera modules, and video interfaces where the serializer/deserializer pair needs a low-jitter differential path. The narrow tolerance means the rail must be clean — a 3.3V LDO or switching regulator with <50 mV ripple is recommended.
Sourcing and lifecycle posture
No PCN or EOL notice has been issued.