Texas Instruments CDCE913PW spread spectrum clock driver, PLL with bypass, 230 MHz max, LVCMOS I/O, 14-TSSOP, tube.
| Parameter | Value |
|---|---|
| Type | Spread Spectrum Clock Driver |
| Mounting | Surface Mount |
| Supply voltage | 1.7V ~ 1.9V, 2.3V ~ 3.6V |
| Frequency - max | 230MHz |
| Operating temperature | -40°C~85°C |
| PLL | Yes with Bypass |
| Input | LVCMOS, Crystal |
| Output | LVCMOS |
| Package | Tube |
| Case | 14-TSSOP (0.173\", 4.40mm Width) |
| Divider (Multiplier) | Yes/Yes |
| Number of circuits | 1 |
| Ratio - Input:Output | 1:3 |
| Differential - Input:Output | No/No |
The Texas Instruments CDCE913PW is a spread spectrum clock driver in a 14-TSSOP package, delivering up to 230 MHz on LVCMOS outputs from an LVCMOS or crystal input. The integrated PLL supports a bypass mode, letting you feed the reference clock straight through when spread-spectrum modulation is not needed — useful for bench validation or for clocking a low-jitter ADC that cannot tolerate the modulated edge.
Submit an RFQ against your target quantity.
The CDCE913PW integrates a PLL with a bypass mode, allowing the input clock to pass through unmodulated when spread-spectrum operation is not required.
The device is classified as a Spread Spectrum Clock Driver, meaning it modulates the output clock edges to reduce peak EMI emissions from the downstream digital bus.