Skip to main content
Skyworks Solutions SI8715BD-A-ISR — Digital Isolators

Skyworks SI8715BD-A-ISR Digital Isolator, 5000Vrms, 15Mbps

MPNSI8715BD-A-ISR
End of Life

Skyworks Solutions SI8715BD-A-ISR general-purpose digital isolator, capacitive coupling, 1-channel unidirectional, 5000Vrms isolation, 15Mbps data rate, 6-SOIC wide body, Tape & Reel.

$3.16Ref. price · indicative, final on quote
Packaging6-SOIC (0.295", 7.50mm Width)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

SI8715BD-A-ISR specifications
ParameterValue
TypeGeneral Purpose
Channel typeUnidirectional
MountingSurface Mount
Supply voltage2.5V ~ 5.5V
Voltage - isolation5000Vrms
Isolated powerNo
Operating temperature-40°C ~ 125°C
Pulse width distortion25ns
PackageTape & Reel (TR); Cut Tape (CT)
Data rate15Mbps
TechnologyCapacitive Coupling
Case6-SOIC (0.295\", 7.50mm Width)
Channels1
Inputs - side 1/Side 21/0
Rise (Fall time)2.5ns, 2.5ns
Propagation delay tpLH (tpHL)50ns, 50ns
Common mode transient immunity35kV/µs

Product details

5000Vrms isolation in a 1-channel unidirectional path

The SI8715BD-A-ISR is a Skyworks Solutions general-purpose digital isolator rated for 5000Vrms isolation voltage, built on capacitive coupling technology. Its single unidirectional channel delivers 15Mbps data rate with 50ns typical propagation delay and 2.5ns rise/fall times. The 35kV/µs minimum common-mode transient immunity means this part holds its output state through fast voltage transients across the isolation barrier — a spec that matters in motor-drive, inverter, and industrial power-stage applications where switching edges couple dV/dt into the signal path.

Frequently asked questions

What is the difference between SI8715BD-A-ISR and SI8715BD-A-IS?

The SI8715BD-A-IS is the tube-packaged sibling of the SI8715BD-A-ISR. All electrical specs — 5000Vrms isolation, 15Mbps data rate, 35kV/µs CMTI, 50ns propagation delay — are identical. The -ISR suffix indicates Tape & Reel packaging; the -IS suffix indicates tube. Both drop into the same PCB footprint without rewiring.