150V, 10A common-cathode Schottky in a full-pack TO-220
The RB088T150NZC9 is a 150V, 10A Schottky diode pair in a common-cathode configuration, housed in a TO-220FN full-pack through-hole package. Rated for 10A average rectified current per diode, the pair shares the cathode pin — a single heatsink surface handles both die, simplifying the output-stage layout in a two-diode forward or PFC boost topology.
Automotive AEC-Q101 — the reliability floor
Qualified to AEC-Q101, the automotive discrete semiconductor stress test standard.
Switching speed and conduction loss — the parametric pair
Fast recovery <500ns at >200mA Io — this is the reverse-recovery time that governs switching loss in a hard-switched converter. For a 100kHz PFC stage, the recovery charge per cycle stays low enough that the MOSFET turn-on loss is dominated by the diode's reverse recovery, not the junction capacitance. Forward voltage 880mV at 5A — the conduction loss floor at half the rated current. At 10A the Vf rises; the thermal budget must account for the I×Vf product at the actual load, not the 5A point. The 'Super Low IR' claim (15µA at 150V reverse) keeps standby dissipation negligible at high line.
TO-220FN full-pack — no isolation hardware needed
The TO-220FN (full-pack) isolates the backside tab electrically — no mica washer or sil-pad is required between the tab and the heatsink. The mounting hole pattern matches the standard TO-220 footprint; the through-hole leads take the mechanical strain in a vibration environment better than a surface-mount DPAK.