Skip to main content
Log in
ROHM Semiconductor BD00C0AWCP-V5E2 — Analog & Data Acquisition

BD00C0AWCP-V5E2 Adjustable LDO Regulator, 1 A

MPNBD00C0AWCP-V5E2
End of Life

ROHM BD00C0AWCP-V5E2, adjustable positive LDO regulator, 1 A output, 55 dB PSRR (120 Hz), 0.5 V dropout at 500 mA, -40°C to 150°C, TO-220-5 Full Pack, through-hole mount.

$2.5Ref. price · indicative, final on quote
ROHM Semiconductor BD00C0AWCP-V5E2 datasheet (PDF)
PackagingTO-220-5 Full Pack, Formed Leads
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

BD00C0AWCP-V5E2 specifications
ParameterValue
Output typeAdjustable
MountingThrough Hole
Voltage - input26.5V
Voltage dropout0.5V @ 500mA
Voltage - output15V
Voltage - output (Min (Fixed))3V
Output current1A
Current - supply1 mA
Current - quiescent1 mA
Operating temperature-40°C ~ 150°C (TA)
PSRR55dB (120Hz)
PackageTape & Reel (TR); Cut Tape (CT)
CaseTO-220-5 Full Pack, Formed Leads
Protection featuresOver Current, Over Temperature
Number of regulators1
Output configurationPositive

Product details

1 A adjustable LDO in a through-hole Full Pack

The BD00C0AWCP-V5E2 is a single-output adjustable positive LDO from ROHM, rated for 1 A continuous output current. It takes an input up to 26.5 V and delivers an adjustable output from 3 V up to 15 V using two external resistors.

Dropout is specified at 0.5 V max at 500 mA output. The 55 dB PSRR at 120 Hz rejects ripple from a mains-rectified input.

150°C junction — where this part lives

The operating temperature range runs from -40°C to 150°C. The built-in over-current and over-temperature protection shut the part down before it lets the smoke out.

Sourcing — active, quoted to order

Frequently asked questions

Can BD00C0AWCP-V5E2 replace BA33BC0WFP-?

Not directly. The BA33BC0WFP- is a fixed 3.3 V output in a surface-mount package with a lower 105°C temperature ceiling and a 16 V input limit. The BD00C0AWCP-V5E2 is adjustable, through-hole, and rated to 150°C with a 26.5 V input — different footprint, different thermal envelope. They are not pin-compatible substitutes.