Skip to main content
NXP Semiconductors PCA9702PW,118 — Interface & Transceivers

PCA9702PW,118 NXP SPI GPIO Expander, 5 MHz, 16-TSSOP

MPNPCA9702PW,118
End of Life

NXP Semiconductors PCA9702PW,118 SPI GPIO expander, 8 input-only I/O, 5 MHz clock, push-pull output, 16-TSSOP package, 2.5 V to 5.5 V supply, -40°C to +125°C.

$1.86Ref. price · indicative, final on quote
Packaging16-TSSOP (0.173", 4.40mm Width)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

PCA9702PW,118 specifications
ParameterValue
Output typePush-Pull
MountingSurface Mount
Voltage2.5V ~ 5.5V
Frequency5 MHz
InterfaceSPI Serial
Operating temperature-40°C ~ 125°C
PackageTape & Reel (TR); Cut Tape (CT)
Number of i (O)8 (Input Only)
Case16-TSSOP (0.173\", 4.40mm Width)
Interrupt outputYes

Product details

SPI GPIO expander with 8 input-only channels

The NXP PCA9702PW,118 is an SPI-bus GPIO expander providing 8 input-only I/O lines with a push-pull output stage, clocked at up to 5 MHz over the SPI serial interface. A dedicated interrupt output signals the host when any input changes, eliminating continuous polling and reducing bus traffic in interrupt-driven firmware architectures.

Available in Tape & Reel (TR) or Cut Tape (CT) for prototyping or production volumes — the reel quantity is confirmed at RFQ.

For new designs, the active status and wide supply range make this a low-risk BOM line; no pin-compatible second-source is recorded, so the BOM should be qualified against the single source.

Frequently asked questions

What is the interface of PCA9702PW,118?

The device uses an SPI serial interface with a maximum clock frequency of 5 MHz. The SPI bus connects directly to a host microcontroller or SoC.

What compliance documentation does NXP provide for PCA9702PW,118?

NXP certifies ROHS3 compliance. Additional documentation such as REACH or conflict-minerals declarations is available from the manufacturer or through the distributor at RFQ.