Skip to main content
Log in
NXP Semiconductors MC33932VW — Logic ICs

NXP MC33932VW Automotive Brushed DC Motor Driver, 5A, 5V-28V

MPNMC33932VW
End of Life

NXP MC33932VW, Fully Integrated Brushed DC Motor Driver, 5A Output, 5V-28V Supply, Parallel Interface, CMOS, 44-HSOP, -40°C to 125°C.

$22.89Ref. price · indicative, final on quote
NXP Semiconductors MC33932VW datasheet (PDF)
Packaging44-BSSOP (0.433", 11.00mm Width) Exposed Pad
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MC33932VW specifications
ParameterValue
MountingSurface Mount
Motor type - AC, DCBrushed DC
Voltage - load5V ~ 28V
Supply voltage5V ~ 28V
Output current5A
InterfaceParallel
Operating temperature-40°C ~ 125°C (TA)
PackageTube
FunctionDriver - Fully Integrated, Control and Power Stage
TechnologyCMOS
ApplicationsAutomotive
Case44-BSSOP (0.433\", 11.00mm Width) Exposed Pad
Output configurationHalf Bridge (4)

Product details

5A brushed DC driver for automotive loads

It drives brushed DC motors using four half-bridge outputs, each rated for 5A continuous, making it suitable for automotive applications like window lifts, seat adjusters, and pump actuators where the load current stays under that ceiling.

The driver operates from a 5V to 28V supply, which also serves as the load voltage — no separate power rail needed. This range covers the full automotive battery envelope: nominal 12V, cold-crank dips near 5V, and load-dump transients up to 28V.

Parallel interface and CMOS logic

Control is via a parallel interface, which means each half-bridge is driven by dedicated logic pins — no SPI or PWM serial protocol to configure. The CMOS logic inputs are compatible with 5V microcontrollers directly, so no level shifting is needed when the MCU runs at 5V. At 3.3V logic, check the input threshold levels against the MCU's VOH to confirm margin.

Frequently asked questions

What is the output current and voltage rating of the MC33932VW per channel?

Each of the four half-bridge outputs is rated for 5A continuous. The supply and load voltage range is 5V to 28V, so the motor voltage can be anywhere in that window.

Is the MC33932VW compatible with 5V microcontrollers?

Yes, the CMOS logic inputs are compatible with 5V microcontrollers directly. At 3.3V logic, verify the input threshold levels against the MCU's VOH to ensure adequate margin.