Skip to main content
Log in
NXP Semiconductors 74HCT30DB,118 — Logic ICs

74HCT30DB,118 NXP 74HCT 8-Input NAND Gate, 28ns @ 4.5V

MPN74HCT30DB,118
End of Life

NXP 74HCT30DB,118, 74HCT series, single 8-input NAND gate, surface mount 14-SSOP, 4.5V to 5.5V supply, -40°C to 125°C, 28ns propagation delay at 4.5V, 50pF.

$0.16Ref. price · indicative, final on quote
NXP Semiconductors 74HCT30DB,118 datasheet (PDF)
Packaging14-SSOP (0.209", 5.30mm Width)
RoHSROHS3 Compliant
Series74HCT
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

74HCT30DB,118 specifications
ParameterValue
Series74HCT
Logic typeNAND Gate
MountingSurface Mount
Voltage4.5V ~ 5.5V
Current - quiescent2 µA
Current - output high, low4mA, 4mA
I/O channels8
Operating temperature-40°C ~ 125°C
PackageBulk
Case14-SSOP (0.209\", 5.30mm Width)
Number of circuits1
Input logic level - low0.8V
Input logic level - high2V
Max propagation delay @ v, max CL28ns @ 4.5V, 50pF

Product details

Single 8-input NAND gate in 14-SSOP

Package is 14-SSOP, 0.209-inch body width, 5.30 mm wide. Not just a benchtop part.

Maximum propagation delay is 28 ns at 4.5V supply and 50 pF load. Output drive is symmetric: 4 mA source and 4 mA sink. That's typical for HCT family gates. Enough to drive a few CMOS inputs or a single LED through a resistor, but not for heavy loads like relays or bus lines without a buffer. Quiescent current is just 2 µA max — negligible in battery-powered or always-on circuits. The gate draws almost nothing when not switching.

This part is marked as Active in the lifecycle status. No last-time-buy or end-of-life notice to plan around. No lead, no cadmium, no phthalates. That's the standard for most commercial and industrial products today.

Frequently asked questions

What is the difference between 74HCT30DB,118 and 74HC30DB,118?

The key difference is the input threshold levels. The 74HCT version uses TTL-compatible thresholds (LOW below 0.8V, HIGH above 2V), while the 74HC version uses CMOS thresholds (LOW below about 1.5V, HIGH above about 3.5V at 5V supply). The 74HCT is the better choice if you are mixing with TTL logic; the 74HC is better for pure CMOS systems. Both are 8-input NAND gates in the same package.

What is the typical propagation delay of 74HCT30DB,118?

Typical delay will be lower, but the 28 ns figure is what you budget for in worst-case timing analysis.

Is 74HCT30DB,118 RoHS compliant?

Yes, it is ROHS3 compliant, meeting the latest EU restrictions on hazardous substances.