Skip to main content
NXP USA Inc. MK20DX64VMC7 — Microcontrollers & Processors (MCU / MPU / DSP)

NXP MK20DX64VMC7 Kinetis K20 MCU, ARM Cortex-M4 72 MHz, 64 KB Flash

MPNMK20DX64VMC7
Active

NXP Kinetis K20 32-bit MCU, ARM Cortex-M4, 72 MHz, 64 KB Flash, 16 KB RAM, 2 KB EEPROM, 70 I/O, CAN, USB OTG, 35-ch 16-bit ADC, 1x 12-bit DAC, -40 to 105°C, 121-MAPBGA (8x8 mm).

$6.9980Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

MK20DX64VMC7 specifications
ParameterValue
SeriesKinetis K20
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.71V ~ 3.6V
Operating temperature-40°C ~ 105°C (TA)
Speed72MHz
PackageTray
RAM size16K x 8
Core size32-Bit Single-Core
EEPROM size2K x 8
PeripheralsDMA, I²S, LVD, POR, PWM, WDT
ConnectivityCANbus, EBI/EMI, I²C, IrDA, SPI, UART/USART, USB, USB OTG
Number of i (O)70
Core processorARM® Cortex®-M4
Case121-LFBGA
Data convertersA/D 35x16b; D/A 1x12b
Program memory size64KB (64K x 8)

Product details

72 MHz Cortex-M4 with 64 KB Flash — fit for a mixed-signal control node

The NXP MK20DX64VMC7 is a 32-bit ARM Cortex-M4 MCU from the Kinetis K20 series, clocked at 72 MHz with 64 KB of Flash program memory and 16 KB of SRAM. The 2 KB of on-chip EEPROM stores calibration constants or configuration parameters without wearing the Flash.

Connectivity and peripheral set — CAN, USB OTG, and external bus

Peripherals include DMA, I²S for audio or serial data streaming, low-voltage detect (LVD), power-on reset (POR), PWM timers, and a watchdog timer (WDT). The 70 general-purpose I/O pins are available in the 121-ball BGA package, though some are shared with the EBI and USB PHY.

Frequently asked questions

What is MK20DX64VMC7's listed speed?

The core runs at 72 MHz, which is the maximum clock for this Kinetis K20 Cortex-M4 device.

What is the closest pin-compatible alternative to MK20DX64VMC7?

Pin-compatible alternatives exist within the Kinetis K20 family with different Flash and RAM densities, such as the MK20DX128VMC7 (128 KB Flash) or MK20DX256VMC7 (256 KB Flash). These share the same 121-MAPBGA footprint and peripheral map, allowing a firmware-only migration for increased memory.