Skip to main content
NXP USA Inc. LPC812M101JDH20118 — Microcontrollers & Processors (MCU / MPU / DSP)

NXP LPC812M101JDH20118 ARM Cortex-M0+ MCU, 30 MHz, 16 KB Flash

MPNLPC812M101JDH20118
Active

NXP LPC81xM series, 32-bit ARM Cortex-M0+ MCU, 30 MHz, 16 KB Flash, 4 KB RAM, 18 I/O, 1.8V–3.6V, internal oscillator, 20-TSSOP, -40°C to 105°C.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

LPC812M101JDH20118 specifications
ParameterValue
SeriesLPC81xM
MountingSurface Mount
Oscillator typeInternal
Program memory typeFLASH
Voltage - supply (Vcc (Vdd))1.8V ~ 3.6V
Operating temperature-40°C~105°C(TA)
Speed30MHz
PackageBulk
RAM size4K x 8
Core size32-Bit Single-Core
PeripheralsBrown-out Detect/Reset, POR, PWM, WDT
ConnectivityI²C, SPI, UART/USART
Number of i (O)18
Core processorARM® Cortex®-M0+
Case20-TSSOP (0.173\", 4.40mm Width)
Program memory size16KB (16K x 8)

Product details

30 MHz Cortex-M0+ — what it means for the loop

At 30 MHz the core handles sensor polling, UART bridging, and simple PID loops. The 4 KB RAM limits buffered data after stack and variables. The internal oscillator saves a crystal and two load caps on the board.

Industrial temperature grade — deployment fit

Rated -40°C to 105°C operating, so it goes straight into outdoor telecom cabinets, motor-drive control boards, and engine-bay electronics without a commercial-temperature gap. The 20-TSSOP body (4.40 mm width) fits tight layouts; spring-cage or press-fit headers work for prototyping, but production should use reflow soldering per the package land pattern.

Lifecycle and sourcing

The LPC812M101JDH20118 carries an Active product status. Sourced and quoted to order against an RFQ through independent distribution; availability and current pricing confirmed at quote time.

Frequently asked questions

What is LPC812M101JDH20118's listed speed?

The core runs at 30 MHz, which is the maximum clock for the ARM Cortex-M0+ in this device. Enough for sensor polling and UART bridging; not intended for high-throughput DSP.