NXP LPC81xM series 32-bit ARM Cortex-M0+ MCU, 30MHz, 8KB Flash, 2KB RAM, 14 I/O, 1.8V–3.6V supply, -40°C to 105°C, 16-TSSOP, bulk pack.
| Parameter | Value |
|---|---|
| Series | LPC81xM |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~105°C(TA) |
| Speed | 30MHz |
| Package | Bulk |
| RAM size | 2K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Connectivity | I²C, SPI, UART/USART |
| Number of i (O) | 14 |
| Core processor | ARM® Cortex®-M0+ |
| Case | 16-TSSOP (0.173\", 4.40mm Width) |
| Program memory size | 8KB (8K x 8) |
The NXP LPC811M001JDH16129 is a 32-bit ARM Cortex-M0+ MCU from the LPC81xM series, clocked at 30 MHz with 8 KB Flash and 2 KB RAM. The 1.8 V to 3.6 V supply range and -40°C to 105°C temperature grade suit it for industrial sensor nodes and motor-control feedback.
The 16-TSSOP package (4.40 mm width) fits on tight mixed-signal boards alongside op-amps and level shifters.
The 16-TSSOP pinout follows the standard LPC81xM assignment: VDD and VSS on pins 16 and 8, with I/O, I²C, SPI, and UART signals on the remaining 14 pins. Refer to the NXP LPC81xM datasheet for the full pin map.
The LPC811M001JDH16129 is listed in bulk (tray) packaging. For Tape & Reel, order the -151 or -518 suffix variants of the same 16-TSSOP part.
No, the LPC811M001JDH16129 has an internal oscillator, so an external crystal is not required for basic operation.
Within the same LPC81xM series and 16-TSSOP package, NXP offers variants with 16 KB or 32 KB Flash (e.g., LPC812M101JDH16). These are pin-compatible and drop-in replacements for designs needing more code space.