NXP LPC80xM series 32-bit ARM Cortex-M0+ MCU, LPC804M101JDH24FP, 15 MHz, 32 KB Flash, 4 KB RAM, 1.71–3.6 V supply, 12-bit ADC (12 ch), 10-bit DAC, 21 I/O, internal oscillator, -40 to 105°C, 24-TSSOP, tube.
| Parameter | Value |
|---|---|
| Series | LPC80xM |
| Mounting | Surface Mount |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.71V ~ 3.6V |
| Operating temperature | -40°C ~ 105°C (TA) |
| Speed | 15MHz |
| Package | Tube |
| RAM size | 4K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Connectivity | I²C, SPI, UART/USART |
| Number of i (O) | 21 |
| Core processor | ARM® Cortex®-M0+ |
| Case | 24-TSSOP (0.173\", 4.40mm Width) |
| Data converters | A/D 12x12b; D/A 1x10b |
| Program memory size | 32KB (32K x 8) |
The NXP LPC804M101JDH24FP is a 32-bit ARM Cortex-M0+ MCU clocked at 15 MHz, with 32 KB Flash and 4 KB RAM in a 24-TSSOP package.
At 15 MHz the Cortex-M0+ executes most single-cycle instructions, giving roughly 15 MIPS. That is enough for a 10 kHz current-control loop with a few hundred lines of C.
Within the LPC80xM series, the LPC804M101JDH20FP is pin-compatible in a 20-TSSOP package (fewer I/O). For a 24-TSSOP with the same pinout, the LPC804M101JDH24FP is the only variant — no direct second source exists outside NXP's own family.
The core speed is 15 MHz. That is the maximum clock rate for the ARM Cortex-M0+ core on this device.