Skip to main content
Micron Technology MT25QU02GCBB8E12-0SIT — Memory (DRAM / SRAM / Flash / EEPROM)
Micron Technology

Micron MT25QU02GCBB8E12-0SIT 2 Gbit SPI NOR Flash, 133 MHz

MPNMT25QU02GCBB8E12-0SIT
Active

Micron MT25QU02GCBB8E12-0SIT, 2 Gbit SPI NOR Flash, 133 MHz clock, 1.7 V supply, 256M x 8 organization, -40 to 85°C, 24-TPBGA tray.

MT25QU02GCBB8E12-0SIT datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MT25QU02GCBB8E12-0SIT Technical Specifications
ParameterValue
Interface_typeSPI
Mounting_typeSurface Mount
Operating temperature high-40°C to 85°C(TA)
Frame_size2Gbit
Memory_typeNon-Volatile
Frequency_hz133000000
Package_typeTray
Memory formatFLASH
Product_statusActive
Supply_voltage_v1.7
Memory organization256M x 8
Write cycle time - word, page8ms, 2.8ms

Product details

2 Gbit SPI NOR Flash for high-density code and data storage

The Micron MT25QU02GCBB8E12-0SIT is a 2 Gbit serial NOR Flash memory organized as 256M x 8 bits, communicating over a standard SPI interface at up to 133 MHz. It operates from a 1.7 V supply, making it suitable for low-voltage, battery-powered systems, and is rated over the -40 to 85°C industrial temperature range. This density tier targets applications requiring large code shadowing, execute-in-place (XIP) firmware, or data logging in networking equipment, industrial controllers, and portable instrumentation where a single SPI NOR device replaces multiple smaller memories.

Package and storage considerations

Supplied in a 24-ball TPBGA (Thin Profile Ball Grid Array) on tray, this package requires a dry-storage plan if the reel seal is broken — standard MSL handling applies. The surface-mount BGA footprint suits high-density PCBs where board area is at a premium, but verify reflow profile compatibility with your assembly line. Store the reels dry; a moisture-sensitive device this dense is not forgiving of rework after moisture absorption.

Frequently asked questions

What is the difference between MT25QU02GCBB8E12-0SIT and MT25QL256ABA?

The MT25QU02GCBB8E12-0SIT is a 2 Gbit device at 1.7 V supply, while the MT25QL256ABA is a 256 Mbit device at 2.7 V supply. The density difference is 8x, and the supply voltage difference means the MT25QU02 is suited for 1.8 V systems while the MT25QL256 targets 2.7-3.6 V rails. Both use SPI at 133 MHz and share the same -40 to 85°C temperature grade.

Does MT25QU02GCBB8E12-0SIT support Dual/Quad SPI?

The listed interface is standard SPI. The evidence does not confirm Dual or Quad SPI support; verify the full datasheet for extended protocol modes if higher throughput is required.