Skip to main content
Microchip Technology MIC2774N-22YM5 — Discrete Semiconductors

MIC2774N-22YM5 Multi-Voltage Supervisor, Active Low

MPNMIC2774N-22YM5
End of Life

Microchip Technology MIC2774N-22YM5 multi-voltage supervisor, active-low open-drain output, 2.25V fixed and adjustable threshold, 140ms reset timeout, SOT-23-5 surface-mount package, -40 to 85°C.

$0.37Ref. price · indicative, final on quote
PackagingSC-74A, SOT-753
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MIC2774N-22YM5 specifications
ParameterValue
TypeMulti-Voltage Supervisor
MountingSurface Mount
Voltage - threshold2.25V, Adj
Number of voltages monitored2
Operating temperature-40°C ~ 85°C (TA)
ResetActive Low
OutputOpen Drain or Open Collector
PackageBulk
Reset timeout140ms Minimum
CaseSC-74A, SOT-753

Product details

Dual-voltage supervisor in SOT-23-5

The MIC2774N-22YM5 is a dual micro-power low-voltage supervisor from Microchip Technology, monitoring two supply rails: one fixed at 2.25 V threshold and a second adjustable via external resistor divider. The active-low open-drain output asserts reset when either monitored voltage falls below its threshold, holding the output low for a minimum of 140 ms after both rails recover.

Reset timing and output drive

The 140 ms minimum reset timeout ensures the downstream processor or logic is held in reset long enough for the regulated supplies to settle after a brown-out or power-up event, eliminating false starts. An open-drain output allows the reset line to be pulled to any voltage up to the absolute maximum of the output transistor, enabling level translation between different supply domains without an external level shifter.

Supply monitoring and threshold selection

The adjustable channel's threshold is set by two external resistors, allowing the designer to fine-tune the trip point to the exact tolerance of the monitored supply, which is useful when the load's minimum operating voltage is tighter than the regulator's tolerance band.

Active production status

No official successor or pin-compatible cross-reference is listed by the manufacturer; the part is the current offering in its supervisory family.

Frequently asked questions

What is the MIC2774N-22YM5's reset output type and polarity?

The reset output is open-drain, active-low — it pulls low when a monitored voltage drops below its threshold and releases to high-impedance after the 140 ms timeout once both voltages are valid.

Does the MIC2774N-22YM5 monitor one or two voltages?

It monitors two voltages: one fixed at 2.25 V and one adjustable via an external resistor divider, covering a wide range of supply rails in a single SOT-23-5 package.