Microchip Technology MCP1825T-3002E/DC LDO regulator, 3V fixed output, 500mA, SOT-223-6, surface mount, tape and reel.
| Parameter | Value |
|---|---|
| Output type | Fixed |
| Mounting | Surface Mount |
| Voltage - input | 6V |
| Voltage dropout | 0.35V @ 500mA |
| Voltage - output (Min (Fixed)) | 3V |
| Output current | 500mA |
| Current - quiescent | 220 µA |
| Operating temperature | -40°C ~ 125°C |
| PSRR | 60dB (100Hz) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Case | SOT-223-6 |
| Control features | Enable, Power Good |
| Protection features | Over Temperature, Short Circuit, Under Voltage Lockout (UVLO) |
| Number of regulators | 1 |
| Output configuration | Positive |
The MCP1825T-3002E/DC comes in a SOT-223-6 package with a supplier device package designation of SOT-223-5 — the thermal pad and pin 5 are internally connected, so the PCB footprint uses a 5-pad layout with the tab as the ground plane.
PSRR is 60 dB at 100 Hz, which attenuates 100 mV of 100 Hz ripple to 100 µV at the output; this matters for analog supply rails where line-frequency hum couples into the signal chain.