Microchip Technology DSC8001 series, XO (Standard) MEMS oscillator, CMOS output, 1 MHz ~ 150 MHz, ±25ppm stability, 4-SMD No Lead package, AEC-Q100 rated.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC8001 |
| Mounting | Surface Mount |
| Programmable type | Blank (User Must Program) |
| Supply voltage | 1.8V ~ 3.3V |
| Current - supply | 12.2mA |
| Current - supply (Disable) | 15 µA |
| Available frequency range | 1 MHz ~ 150 MHz |
| Frequency stability (Total) | ±25ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Output | CMOS |
| Package | Tube |
| Ratings | AEC-Q100 |
| Function | Standby |
| Base resonator | MEMS |
| Case | 4-SMD, No Lead |
The DSC8001DL2 ships as a blank (user-programmable) device — the output frequency is set during board-level programming using Microchip's TimeFlash or a compatible programmer, not pre-configured at the factory.
It outputs a standard CMOS signal, making it a direct drop-in replacement for quartz-based XOs with the same footprint and supply voltage range.