The supply voltage spans 2.25V to 3.63V, so it can run from a 2.5V or 3.3V rail without a separate LDO—handy when the MCU's core and I/O share a single regulator.
Frequency stability and supply current at the board level
That is tight enough for a 100BASE-T1 Ethernet PHY or a CAN-FD controller where bit timing margin depends on the reference accuracy. Maximum supply current is 27 mA typ when enabled, and 23 mA typ when disabled—the disable current is still high enough that a simple load switch ahead of the oscillator saves more power than relying on the enable pin alone in a sleep-mode design.
Package footprint and layout consideration
The 6-VDFN package measures 5.00mm x 3.20mm with a seated height of 0.90mm max. The 0.197" x 0.126" footprint matches the industry-standard 5x3.2 mm oscillator land pattern—no via-in-pad required, but a solid ground pour under the package helps with thermal and EMI. Surface-mount on tape and reel (TR) packaging is standard for automated assembly.