The DSC1203CI3-106M2500T: LVDS is a differential output that keeps noise coupling low over longer PCB traces — useful when the oscillator sits on a different board section from the FPGA or SerDes receiver. Supply voltage range of 2.5V to 3.3V means it can run from a common 3.3V rail or a lower 2.5V I/O supply without a separate regulator.
Active current is 32 mA typical at 106.25 MHz — the LVDS output stage accounts for most of that; the MEMS resonator itself draws very little.
Housed in a 6-VDFN package measuring 3.20 mm x 2.50 mm with a seated height of 0.90 mm — small enough to fit under a shielding can or on a dense mixed-signal board.
No stock-holding claim; sourced through independent distribution.