The DSC1201NE2-75M00000 is a fixed-frequency MEMS-based XO (Standard) oscillator delivering a 75 MHz CMOS output from a 2.5V to 3.3V supply rail. Its ±25 ppm frequency stability covers the timing budget for 100BASE-TX Ethernet, CAN FD, or high-speed serial interfaces without needing a TCXO.
Standby power-down and low-power idle
When the enable pin is de-asserted, the oscillator enters a standby (power-down) state drawing 5 µA max — a fraction of the 27 mA typical active current. This lets a battery-powered ECU or sensor node gate the clock between wake cycles, preserving the energy budget for the rest of the system.
Housed in a 6-VDFN package measuring 7.00 mm × 5.00 mm with a seated height of 0.90 mm, this oscillator fits a standard surface-mount layout. The 0.276" × 0.197" footprint matches the common 7×5 mm oscillator pad pattern — no board spin needed if you are replacing a quartz-based XO in the same outline.