AEC-Q100 grade and under-hood temperature profile
The DSC1201DA3-PROGT: Rated AEC-Q100 and specified across -40 to 125°C, this MEMS XO is qualified for engine-bay ECUs where the ambient temperature exceeds 105°C on a summer grade. The 125°C ceiling leaves margin for self-heating inside a sealed module.
Programmable blank — frequency set at programming
Supplied as a blank device (User Must Program), the DSC1201DA3-PROGT accepts any output frequency from 2.5 MHz to 170 MHz. One inventory line covers multiple BOM positions; the frequency is written during board-level programming or pre-programmed by the distributor. The 2.25 V to 3.63 V supply range matches common automotive 3.3 V and 2.5 V rails without an external LDO.
Standby function and package footprint
A Standby (Power Down) pin reduces current draw to near-zero when the ECU enters sleep mode — the oscillator wakes on a logic-level transition without a power-on re-initialization delay. Housed in a 6-VDFN measuring 2.50 mm x 2.00 mm x 0.90 mm, the package fits tight PCB layouts common in automotive camera modules and sensor nodes.