Skip to main content
Log in
Microchip Technology DSC1200NL3-PROG — Crystals & Oscillators

DSC1200NL3-PROG Programmable MEMS Oscillator

MPNDSC1200NL3-PROG
Active

Microchip DSC1200NL3-PROG, MEMS-based XO (Standard), programmable blank, 2.5 MHz to 450 MHz, ±20 ppm total stability, -40°C to 105°C, 6-VDFN surface-mount package.

$2.6100Ref. price · indicative, final on quote
Microchip Technology DSC1200NL3-PROG datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

DSC1200NL3-PROG specifications
ParameterValue
TypeXO (Standard)
SeriesDSC1200
MountingSurface Mount
Programmable typeBlank (User Must Program)
Voltage2.25V ~ 3.63V
Available frequency range2.5 MHz ~ 450 MHz
Frequency stability (Total)±20ppm
Operating temperature-40°C~105°C
Size (Dimension)0.276\" L x 0.197\" W (7.00mm x 5.00mm)
Height - seated0.035\" (0.90mm)
PackageTube
FunctionStandby (Power Down)
Base resonatorMEMS
Case6-VDFN

Product details

MEMS oscillator for field-programmable clock trees

The DSC1200NL3-PROG is a MEMS-based XO (Standard) from Microchip's DSC1200 series, supplied as a blank device that the user programs to any frequency between 2.5 MHz and 450 MHz. The 6-VDFN package (7.00mm x 5.00mm, 0.90mm seated height) fits a standard oscillator footprint — the same land pattern used by many quartz oscillators, so a board spin is not required when migrating from quartz to MEMS.

Supply voltage and power-down control

Operating from 2.25 V to 3.63 V, the DSC1200NL3-PROG covers common 2.5 V and 3.3 V logic rails without an external regulator — one supply rail serves the full range.

Programming workflow and lifecycle

Because the device ships as a blank (user-programmable), procurement lead time includes the programming step — either factory-programmed orders or in-house programming with Microchip's TimeFlash or a compatible programmer.

Frequently asked questions

Is the DSC1200NL3-PROG a direct replacement for a fixed-frequency DSC1200NL3?

No. The DSC1200NL3-PROG is a blank device that must be programmed to the desired frequency; a fixed-frequency DSC1200NL3 is pre-programmed at the factory. They share the same package and pinout, but the PROG variant requires a programming step before use.

What is the output type of the DSC1200NL3-PROG?

The evidence does not specify the output logic type (e.g., LVCMOS, LVDS, HCSL). Refer to the full datasheet for output configuration details — the part is programmable, so the output format may be selectable during programming.