Microchip DSC1200 series, XO (Standard) MEMS oscillator, programmable blank, 2.5 MHz to 450 MHz, ±20 ppm total stability, 2.25V-3.63V supply, 6-VDFN package, -40°C to 105°C.
| Parameter | Value |
|---|---|
| Type | XO (Standard) |
| Series | DSC1200 |
| Mounting | Surface Mount |
| Programmable type | Blank (User Must Program) |
| Voltage | 2.25V ~ 3.63V |
| Available frequency range | 2.5 MHz ~ 450 MHz |
| Frequency stability (Total) | ±20ppm |
| Operating temperature | -40°C~105°C |
| Size (Dimension) | 0.098\" L x 0.079\" W (2.50mm x 2.00mm) |
| Height - seated | 0.035\" (0.90mm) |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Function | Standby (Power Down) |
| Base resonator | MEMS |
| Case | 6-VDFN |
The DSC1200DL3-PROGT covers 2.5 MHz to 450 MHz, blank-programmable — the user sets the output frequency via the Microchip programming toolchain, not a factory mask.
Surface-mount, tape-and-reel or cut-tape delivery; the 6-pin DFN lands on a standard 1.0 mm pitch pad layout.
The DSC1200DL3-PROGT is a blank (user-programmable) MEMS oscillator. Programming requires Microchip's TimeFlash field programmer or the DSC-PROG-TFlash2 kit, which writes the output frequency, pull range, and other configuration into the device's non-volatile memory. No factory mask charge — the same order code covers any frequency in the 2.5 MHz to 450 MHz range.
Yes — because it is field-programmable, a single DSC1200DL3-PROGT BOM line can serve multiple frequency positions. Program each device to the target frequency before assembly. The ±20 ppm total stability matches or exceeds most fixed-frequency XOs in the same package.
The DSC1200 series is manufactured RoHS-compliant and lead-free per EU Directive 2011/65/EU. The 6-VDFN package uses NiPdAu or matte-tin terminations — no restricted substances in the bill of materials.
2.5 MHz to 450 MHz, continuous coverage. The blank device can be programmed to any frequency within that band, including non-standard values, with 0.1 ppm resolution.
Microchip's TimeFlash field programmer (part number DSC-PROG-TFlash2) or the production-grade gang programmer (DSC-PROG-8400) both support the DSC1200 series. The programming interface uses a standard 6-pin header — no special adapter required for the 6-VDFN package.