Zener TVS – 500W peak pulse, 6.9V standoff, axial
The 1N6105: The breakdown voltage range starts at 8.22V minimum, and the clamping voltage at peak pulse current is 14.07V maximum. This is a general-purpose protection diode in a through-hole axial package (B, Axial), suitable for clamping transients on low-voltage DC rails where a bidirectional clamp is needed.
With a peak pulse current of 35.44A into the 14.07V clamp, the 1N6105 can absorb substantial energy from a surge without letting the protected rail exceed that clamp ceiling. For a 5V or 3.3V logic rail, the 6.9V standoff provides margin above the normal operating voltage, while the 14.07V clamp stays below the absolute maximum of many 5V-tolerant ICs.