10 µF at 16 V — molded tantalum, 2 Ohm ESR
In a 16 V rail with 80 % derating (12.8 V applied), the part stays inside its safe operating area across the full temperature range.
At 125°C the voltage derating is more aggressive — KYOCERA AVX recommends applying no more than 2/3 of rated voltage above 85°C, so at 125°C the applied voltage should stay below 10.7 V.
Size code W — 2312 metric footprint
Manufacturer size code W maps to the 2312 (6032 metric) case: 6.00 mm x 3.20 mm x 1.50 mm seated height. This is a standard tantalum chip footprint — the same land pattern serves the TAJ W-size across multiple capacitance/voltage combinations, so a single PCB pad layout can accommodate a range of BOM variants without a board spin.
Surface-mount, tape-and-reel ready
Supplied on tape and reel (cut tape also available), this part is pick-and-place ready. The molded case has a flat top for vacuum pickup and the terminations are matte tin over nickel — compatible with standard lead-free reflow profiles. No special bake required if the moisture barrier bag is intact; if the bag is breached, follow the standard tantalum MSL handling (MSL 3 typical for this class).