Skip to main content
Log in
Infineon Technologies S25FL512SDSMFB013 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL512SDSMFB013 Cypress NOR Flash, 512Mbit, AEC-Q100, 80 MHz

MPNS25FL512SDSMFB013
Active

Cypress S25FL512SDSMFB013, Automotive AEC-Q100 FL-S series, 512Mbit NOR Flash, SPI Quad I/O, 80 MHz, 2.7-3.6V, -40~105°C, 16-SOIC.

$10.5875Ref. price · indicative, final on quote
Infineon Technologies S25FL512SDSMFB013 datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

S25FL512SDSMFB013 specifications
ParameterValue
SeriesAutomotive, AEC-Q100, FL-S
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage2.7V ~ 3.6V
Clock frequency80 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C~105°C(TA)
PackageTape & Reel (TR)
TechnologyFLASH - NOR
Memory size512Mbit
Memory formatFLASH
Case16-SOIC (0.295\", 7.50mm Width)
Memory organization64M x 8

Product details

512 Mbit NOR Flash for automotive and industrial code storage

It stores firmware and calibration data in automotive ECUs, ADAS modules, and industrial controllers where fast random access and high reliability are required. The SPI Quad I/O interface at 80 MHz provides read throughput up to roughly 40 MB/s, enough for execute-in-place boot or over-the-air update staging.

AEC-Q100 — automotive qualification and temperature grade

Memory organization and interface

Organized as 64 M x 8 bits, the flash is byte-addressable for random reads and page-programmable for writes. The SPI Quad I/O interface uses four data lines plus chip select, clock, and write-protect — eight signals total, fitting in the 16-SOIC package.

Frequently asked questions

Is S25FL512SDSMFB013 automotive qualified?

Yes, it is AEC-Q100 qualified, part of the Automotive FL-S series. The operating temperature range is -40°C to 105°C, suitable for under-hood and chassis-domain automotive electronics.

What is the memory size of S25FL512SDSMFB013?

512 Mbit, organized as 64 M x 8 bits. This is a NOR Flash memory, non-volatile, with SPI Quad I/O interface.

What is the voltage range of S25FL512SDSMFB013?

2.7 V to 3.6 V supply. This covers a nominal 3.3 V rail with margin for transients, compatible with common 3.3 V logic families.

Can S25FL512SDSMFB013 replace S25FL512SDSMFB010?

Yes, the S25FL512SDSMFB013 is functionally equivalent to the S25FL512SDSMFB010 — same 512 Mbit density, SPI Quad I/O, 80 MHz, 16-SOIC package, and -40°C to 105°C temperature range. Both are EOL.