Skip to main content
S25FL164K0XMFI010

S25FL164K0XMFI010 64Mbit NOR Flash, SPI Quad I/O, 108 MHz, 8-SOIC

MPNS25FL164K0XMFI010
Obsolete

Cypress (Spansion) FL1-K series, 64Mbit NOR flash, SPI Quad I/O, 108 MHz, 2.7-3.6 V, 8-SOIC, -40 to 85 °C, tray.

$1.1800Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL164K0XMFI010 specifications
ParameterValue
SeriesFL1-K
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage2.7V ~ 3.6V
Clock frequency108 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C~85°C(TA)
PackageTray
TechnologyFLASH - NOR
Memory size64Mbit
Memory formatFLASH
Case8-SOIC (0.209\", 5.30mm Width)
Memory organization8M x 8
Write cycle time - word, page3ms

Product details

64 Mbit NOR flash with SPI Quad I/O — what it does and where it fits

The S25FL164K0XMFI010 is a 64 Mbit NOR flash from the FL1-K family, organized as 8 M x 8 bits. It communicates over SPI with Quad I/O support at 108 MHz.

Obsolete — sourcing through independent channels

This part is marked obsolete by the manufacturer. No official successor order code is listed, so a direct pin-compatible drop-in from Cypress (Infineon) is not confirmed.

108 MHz clock and Quad I/O — bus margin for the design

The 108 MHz clock rate with Quad I/O provides a sustained read throughput higher than single-bit SPI at the same frequency. The 3 ms page write time is typical for this NOR generation.

Frequently asked questions

Is S25FL164K0XMFI010 obsolete?

Yes, the manufacturer lists it as obsolete. No official replacement order code is published, so the part is available through independent distribution on a quoted-to-order basis.

What is the operating voltage of S25FL164K0XMFI010?

The supply voltage range is 2.7 V to 3.6 V, making it compatible with standard 3.3 V logic rails.

Can S25FL164K0XMFI010 be used with 3.3V?

Yes, 3.3 V falls within the rated 2.7 V to 3.6 V supply range.