Skip to main content
Infineon Technologies S25FL129P0XMFI011 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL129P0XMFI011 Cypress 128Mbit NOR Flash, SPI Quad I/O

MPNS25FL129P0XMFI011
Obsolete

Cypress FL-P series, S25FL129P0XMFI011, 128Mbit NOR Flash; SPI Quad I/O at 104 MHz; 2.7–3.6V single rail; 16-SOIC (7.50 mm body); -40°C to 85°C; 16M × 8 organization; write cycle 5µs word / 3ms page; Tube.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

S25FL129P0XMFI011 specifications
ParameterValue
SeriesFL-P
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage2.7V ~ 3.6V
Clock frequency104 MHz
Memory interfaceSPI - Quad I/O
Operating temperature-40°C ~ 85°C (TA)
PackageTube
TechnologyFLASH - NOR
Memory size128Mbit
Memory formatFLASH
Case16-SOIC (0.295\", 7.50mm Width)
Memory organization16M x 8
Write cycle time - word, page5µs, 3ms

Product details

Obsolete — plan the replacement now

Cypress (now Infineon) has discontinued the FL-P series. The exact successor order code depends on density and temperature grade; confirm the cross-reference against your specific firmware image size and operating temperature requirement.

Write-cycle timing and endurance

Page program time is 3 ms typical, word program 5 µs typical. These are the numbers to budget for OTA update or field-reprogramming windows. NOR Flash endurance is typically rated at 100,000 erase cycles per sector — the FL-P family follows that norm, so wear-leveling in the filesystem layer is advisable if the device logs configuration data frequently.

Frequently asked questions

Is S25FL129P0XMFI011 obsolete and what is the replacement?

Yes, the S25FL129P0XMFI011 is obsolete. The most common pin-compatible replacements are the S25FL128S or S25FL132K series from Cypress/Infineon, which share the same 16-SOIC package, SPI Quad I/O interface, and 2.7–3.6 V supply. Verify the exact density and temperature grade against your design before substituting.