Skip to main content
Infineon Technologies S25FL064LABMFB000 — Memory (DRAM / SRAM / Flash / EEPROM)

S25FL064LABMFB000 64Mbit NOR Flash, 108 MHz, AEC-Q100

MPNS25FL064LABMFB000
Active

Infineon Technologies S25FL064LABMFB000, Automotive AEC-Q100 FL-L series, 64Mbit NOR Flash, SPI Quad I/O, 108 MHz, 16-SOIC (7.50mm), -40 to 105°C, Tray.

$2.9050Ref. price · indicative, final on quote
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

S25FL064LABMFB000 specifications
ParameterValue
SeriesAutomotive, AEC-Q100, FL-L
Memory typeNon-Volatile
MountingSurface Mount
Supply voltage2.7V ~ 3.6V
Clock frequency108 MHz
Memory interfaceSPI - Quad I/O, QPI
Operating temperature-40°C~105°C(TA)
PackageTray
TechnologyFLASH - NOR
Memory size64Mbit
Memory formatFLASH
Case16-SOIC (0.295\", 7.50mm Width)
Memory organization8M x 8

Product details

Quad SPI throughput and code-shadowing fit

The S25FL064LABMFB000: With a 108 MHz clock and Quad I/O read, the sustained throughput reaches roughly 54 MB/s — enough to shadow a 64 Mbit firmware image into RAM in under 150 ms, or to run execute-in-place (XIP) code directly from the flash for latency-tolerant routines. The QPI (Quad Peripheral Interface) mode reduces the command-address overhead to a single byte, improving random-read efficiency for small code loops compared to standard SPI.

Active lifecycle and compliance baseline

The 64 Mbit density and NOR flash technology (non-volatile, byte-addressable with fast random read) make it a direct fit for firmware storage, calibration tables, and boot code in automotive body controllers, gateway modules, and sensor fusion ECUs.

Frequently asked questions

What interface and clock speed does this flash support?

It supports SPI Quad I/O and QPI (Quad Peripheral Interface) modes with a maximum clock frequency of 108 MHz. The Quad I/O mode delivers roughly 54 MB/s read throughput, sufficient for fast code shadowing or XIP in real-time automotive firmware.