Skip to main content
Log in
Infineon Technologies IPAN60R280P7SXKSA1 — Discrete Semiconductors

IPAN60R280P7SXKSA1 CoolMOS P7 N-Ch 650V 12A TO-220 Full Pack

MPNIPAN60R280P7SXKSA1
Last Buy

Infineon CoolMOS P7 series, N-Channel MOSFET, 650 V drain-source, 12 A continuous drain, 280 mOhm Rds(on) at 10 V gate drive, TO-220 Full Pack through-hole package, -40°C to 150°C junction temperature.

$1.4400Ref. price · indicative, final on quote
Infineon Technologies IPAN60R280P7SXKSA1 datasheet (PDF)
PackagingTO-220-3 Full Pack
RoHSROHS3 Compliant
SeriesCoolMOS™ P7
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

IPAN60R280P7SXKSA1 specifications
ParameterValue
SeriesCoolMOS™ P7
FET typeN-Channel
MountingThrough Hole
Drain to source voltage650 V
Drive voltage (Max rds on, min rds on)10V
Current - continuous drain (Id) @ 25°C12A (Tc)
Power dissipation24W (Tc)
Operating temperature-40°C ~ 150°C (TJ)
PackageTube
Vgs±20V
TechnologyMOSFET (Metal Oxide)
CaseTO-220-3 Full Pack
Vgs(th) (Max) @ id4V @ 190µA
Rds on (Max) @ id, vgs280mOhm @ 3.8A, 10V
Gate charge (Qg) (Max) @ vgs18 nC @ 10 V
Input capacitance (Ciss) (Max) @ vds761 pF @ 400 V

Product details

650 V CoolMOS P7 — last-buy sourcing decision

The IPAN60R280P7SXKSA1: The TO-220 Full Pack isolates the tab electrically, eliminating the need for a mica insulator and thermal grease in through-hole designs.

280 mOhm Rds(on) and 18 nC gate charge — switching loss budget

The 18 nC total gate charge at 10 V is low enough that a standard 1 A gate driver can switch the MOSFET at 100 kHz with under 1.8 W gate-drive loss. The 761 pF input capacitance at 400 V drain-source confirms the switching speed is limited by the driver output impedance, not the device itself.

Last Buy — LTB window and procurement posture

Infineon has announced end-of-life for this order code; remaining stock is being consumed through the LTB window.

TO-220 Full Pack — thermal and mounting checklist

The through-hole mounting requires a 1.0 mm to 1.2 mm diameter hole in the PCB for the tab screw; the three leads solder into 1.0 mm plated through-holes.

Frequently asked questions

What is the Rds(on) of IPAN60R280P7SXKSA1?

This is the conduction loss floor for the 12 A continuous rating.

Is IPAN60R280P7SXKSA1 compatible with IPA60R280P7S?

The IPA60R280P7S is the standard TO-220 (non-isolated) variant of the same CoolMOS P7 die. The IPAN60R280P7SXKSA1 uses the TO-220 Full Pack (isolated tab) package. The electrical ratings — 650 V Vdss, 12 A Id, 280 mOhm Rds(on) — are identical. The packages differ in tab isolation and thermal resistance; the Full Pack variant runs a higher junction-to-case thermal resistance due to the moulded isolation layer. They are not pin-compatible for a direct swap without adjusting the heatsink mounting and thermal interface.