Skip to main content
Infineon Technologies CY7C1414BV18-200BZI — Memory (DRAM / SRAM / Flash / EEPROM)

Cypress CY7C1414BV18-200BZI QDR II SRAM, 36Mbit, 200 MHz

MPNCY7C1414BV18-200BZI
Obsolete

Cypress (Infineon) CY7C1414BV18-200BZI, 36Mbit synchronous QDR II SRAM, 1M × 36 organization, 200 MHz clock, 1.7–1.9V supply, 165-FBGA (15×17mm) tray, -40°C to 85°C industrial temperature.

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

CY7C1414BV18-200BZI specifications
ParameterValue
Memory typeVolatile
MountingSurface Mount
Supply voltage1.7V ~ 1.9V
Clock frequency200 MHz
Memory interfaceParallel
Operating temperature-40°C ~ 85°C (TA)
PackageTray
TechnologySRAM - Synchronous, QDR II
Memory size36Mbit
Memory formatSRAM
Case165-LBGA
Memory organization1M x 36

Product details

The CY7C1414BV18-200BZI is a 36Mbit synchronous QDR II SRAM from Cypress (now Infineon), organized as 1M × 36 and clocked at 200 MHz. QDR II architecture separates read and write data ports, eliminating bus-turnaround dead cycles — each port operates at the full 200 MHz rate, delivering back-to-back throughput that standard synchronous SRAM cannot match.

No last-time-buy window remains open from the factory. If your design can tolerate a form-fit-function alternate, a QDR II+ or QDR IV part from the same Cypress family may be a candidate, but no official pin-compatible successor is listed for this specific density and speed grade.

Frequently asked questions

Where can I buy CY7C1414BV18-200BZI?

We source and quote this obsolete QDR II SRAM to order through independent distribution. Submit an RFQ for current availability and pricing — no stock or lead-time figures are published for this end-of-life line.

What is the closest pin-compatible alternative to CY7C1414BV18-200BZI?

No official pin-compatible successor is listed for this specific 36Mbit, 200 MHz QDR II part in the Cypress family. A QDR II+ or QDR IV device with the same 165-FBGA footprint may exist at a different density or speed grade, but compatibility must be verified against the current datasheet and your PCB layout.