Skip to main content
Log in
Infineon Technologies BTS5434GNT — Power Management (PMIC / Gate Driver)

BTS5434GNT PROFET high-side switch, 45 mOhm, 4-ch, obsolete

MPNBTS5434GNT
Obsolete

Infineon PROFET BTS5434GNT, 4-channel high-side power switch, 45 mOhm Rds(on) typ, 3.4A max per output, 4.5V–28V load, -40°C to 150°C, PG-DSO-28-19 package.

Infineon Technologies BTS5434GNT datasheet (PDF)
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

BTS5434GNT specifications
ParameterValue
SeriesPROFET®
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - load4.5V ~ 28V
Voltage - supply (Vcc (Vdd))Not Required
Output current3.4A
I/O channels4
InterfaceParallel
Operating temperature-40°C~150°C(TJ)
PackageTape & Reel (TR)
FeaturesAuto Restart
Rds on45mOhm
Case28-SOIC (0.295\", 7.50mm Width)
Fault protectionCurrent Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

PROFET 4-channel high-side switch — 45 mOhm, 3.4 A per channel

The Infineon BTS5434GNT is a 4-channel high-side power switch from the PROFET family, designed for general-purpose switching of resistive, inductive, and capacitive loads. It integrates four N-channel MOSFETs with a typical on-resistance of 45 mOhm per channel, each rated for a continuous output current up to 3.4 A. The switch operates over a load voltage range of 4.5 V to 28 V and does not require a separate Vcc supply for the logic interface — the input-to-output ratio is 1:1 with a non-inverting, parallel interface.

The 45 mOhm typical Rds(on) at 25°C will increase with junction temperature — expect roughly a 50% rise at 150°C junction, which must be factored into the thermal budget for continuous 3.4 A per channel.

Procurement for this part is limited to surplus inventory and the independent broker channel.

Frequently asked questions

Where can I buy the BTS5434GNT available via RFQ confirmation?

The BTS5434GNT is obsolete and no longer in production.

Is the BTS5434GNT obsolete or has a replacement?

Yes, the BTS5434GNT is listed as Obsolete by Infineon. No official replacement or successor part number has been recorded for this device.

What is the BTS5434GNT used for?

The BTS5434GNT is a 4-channel high-side power switch used to drive resistive, inductive, or capacitive loads such as lamps, solenoids, relays, and motors in automotive and industrial systems. Its integrated protection and wide temperature range suit harsh environments.

Can the BTS5434GNT be used for automotive applications?

However, the part is obsolete, so new automotive designs should consider current-production PROFET alternatives.