Skip to main content
Infineon Technologies BTS5020-1EKA — Power Management (PMIC / Gate Driver)
Infineon Technologies

BTS5020-1EKA PROFET high-side switch, 20 mOhm, 6.5 A

MPNBTS5020-1EKA
Active

Infineon PROFET BTS5020-1EKA, high-side power switch, single N-channel output, 20 mOhm typ Rds(on), 6.5 A max, 5-28 V load, PG-DSO-14 package, -40 to 150°C junction.

$2.9900Ref. price · indicative, final on quote
BTS5020-1EKA datasheet
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

BTS5020-1EKA Technical Specifications
ParameterValue
SeriesPROFET™
Input typeNon-Inverting
Output typeN-Channel
Switch typeGeneral Purpose
Mounting typeSurface Mount
Voltage - load5V ~ 28V
Voltage - supply (Vcc (Vdd))Not Required
Current - output6.5A
Number of outputs1
InterfaceOn/Off
Operating temperature-40°C~150°C(TJ)
PackageBulk
FeaturesSlew Rate Controlled
Rds on20mOhm
Case14-SOIC (0.154\", 3.90mm Width)
Fault protectionCurrent Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, Short Circuit, UVLO
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

Single-channel high-side switch with full protection suite

The Infineon BTS5020-1EKA is a single-channel PROFET smart high-side switch in a PG-DSO-14 package, rated for load voltages from 5 V to 28 V and delivering up to 6.5 A continuous output. Typical Rds(on) is 20 mOhm, which sets the conduction loss floor at a given load current — at 6.5 A the dissipation is under 0.85 W, manageable in the SO-14 footprint with reasonable copper area.

This switch integrates current limiting (fixed threshold), open-load detection, over-temperature shutdown, over-voltage clamp, short-circuit protection, and under-voltage lockout (UVLO). Open-load detect is useful in lighting and solenoid drivers where a broken wire must be flagged to the system controller without adding a secondary sense line.

Frequently asked questions

Does BTS5020-1EKA have short circuit protection?

Yes, short-circuit protection is included as part of the integrated fault protection set, along with current limiting, over-temperature, over-voltage, open-load detect, and UVLO.

Can BTS5020-1EKA handle 5V input logic?

The input type is non-inverting and the interface is On/Off — the part is designed to be driven directly by a 5 V logic-level signal from an MCU or PLC output without an external level shifter.