Skip to main content
Log in
Infineon Technologies BTS5016SDAAUMA1 — Power Management (PMIC / Gate Driver)

BTS5016SDAAUMA1 PROFET High-Side Switch – 16 mOhm, 5.5 A

MPNBTS5016SDAAUMA1
Active

Infineon PROFET BTS5016SDAAUMA1, single-channel high-side power switch, N-channel output, 16 mOhm typical Rds(on), 5.5 A max continuous, PG-TO252-5-11 package, -40°C to 150°C junction range.

$2.9000Ref. price · indicative, final on quote
Infineon Technologies BTS5016SDAAUMA1 datasheet (PDF)
PackagingTO-252-5, DPak (4 Leads + Tab), TO-252AD
RoHSROHS3 Compliant
SeriesPROFET®
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

BTS5016SDAAUMA1 specifications
ParameterValue
SeriesPROFET®
Input typeNon-Inverting
Output typeN-Channel
TypeGeneral Purpose
MountingSurface Mount
Voltage - load5.5V ~ 20V
Voltage - supply (Vcc (Vdd))Not Required
Output current5.5A
I/O channels1
InterfaceOn/Off
Operating temperature-40°C ~ 150°C (TJ)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesAuto Restart, Status Flag
Rds on16mOhm
CaseTO-252-5, DPak (4 Leads + Tab), TO-252AD
Fault protectionCurrent Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Output configurationHigh Side
Ratio - Input:Output1:1

Product details

Single-channel high-side switch with 16 mOhm Rds(on)

The BTS5016SDAAUMA1 is a single-output high-side N-channel power switch from Infineon's PROFET series, rated for a continuous output current of 5.5 A and a load voltage range of 5.5 V to 20 V. Fault protection includes current limiting (fixed), open-load detection, over-temperature shutdown, and over-voltage clamp. The auto-restart feature means the switch re-tries after a thermal fault once the die cools — useful for driving incandescent lamps or motors where the inrush pulse is brief and the load self-recovers. The status flag output gives the MCU a clean logic-level signal when the switch is in fault, so the firmware can log the event or cycle power.

PG-TO252-5-11 package and thermal land pattern

The package is PG-TO252-5-11, the standard DPAK with four leads plus the exposed tab. The 5.5 A max output is achievable only when the tab is soldered to a reasonable copper pour; in a cramped two-layer board with a small tab pad, expect to derate to 3-4 A depending on ambient. ROHS3 compliant with no exemption issues for lead-free reflow profiles.

The PROFET series is a mature, broadly deployed family, so supply continuity through Infineon's distribution channel is stable.

Frequently asked questions

How can I order BTS5016SDAAUMA1 or request a quote?

The BTS5016SDAAUMA1 is an active Infineon PROFET device available through our distribution desk. Submit an RFQ with your target quantity and delivery timeline — we source against the BOM line and confirm pricing and lead time at quote time. No stock-holding claim; every order is sourced per your requirements.

Is BTS5016SDAAUMA1 a direct replacement for BTS142DATMA1?

No — the BTS142DATMA1 is a low-side switch from the HITFET series with 23 mOhm typical Rds(on) and 4.6 A max output, while the BTS5016SDAAUMA1 is a high-side PROFET with 16 mOhm and 5.5 A. They are not pin-compatible or functionally interchangeable; the output configuration (high-side vs low-side) is a fundamental topology difference that changes the load wiring and the MCU interface.

What is the Rds(on) of BTS5016SDAAUMA1?

Typical Rds(on) is 16 mOhm at nominal conditions. Actual on-resistance rises with junction temperature — expect roughly 1.5× the 25°C value at 150°C TJ. Use the typical figure for loss estimation, but derate for worst-case hot operation in the thermal budget.

Is BTS5016SDAAUMA1 ROHS compliant?

Yes, it is ROHS3 compliant, meaning no restricted substances above the threshold limits, and no exemption for lead in solder. It is compatible with standard lead-free reflow profiles.